06-25-2012 03:04 PM - edited 03-11-2019 04:23 PM
Hi
After I have upgraded our ASA 5510 to 8.4.2 I have problem with the management interface.
Our former firmware 8.2.3 had no problem using the management interface as a DMZ zone, but after we upgraded to 8.4.2 we can't make it work.
The interface and the protocol is up, when I type: show interface.
But when I ping the interface from a computer connectet to the interface, nothing happens.
Even the logging shows nothing.
Anyone who can tell me what the problem can be ?
Best regards
Rex Petersen / Denmark
06-25-2012 08:25 PM
Do you have the command: "management-only" on that management interface?
If you do, please remove it and see if it works.
06-26-2012 11:38 AM
The management-only command has been removed.
I has been working before (8.2) but after upgrading to 8.4.2 it doesn't work.
// Rex
06-26-2012 06:11 PM
Can you please share your config?
I don't see any bugs related to management interface in version 8.4.2
06-27-2012 12:00 AM
I see, I was a little to fast at the keyboard.
It's version 8.4.3(9) and not verson 8.4.2.
// Rex
06-27-2012 08:00 AM
Sounds like a bug to me, you might want to open a TAC case to get it further troubleshot and open a new bug if it is one.
07-02-2012 02:18 AM
Hi JeniferYesterday I testet on another ASA5510 with same firmware version, and everything was working ... strange.
Here the interface setup:
interface Ethernet0/0
nameif outside
security-level 0
ip address xx.xxx.xxx.x 255.255.255.224 standby xx.xxx.xxx.x
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.34.4.246 255.255.248.0 standby 10.34.4.245
!
interface Ethernet0/2
nameif dmz
security-level 20
ip address 10.2.1.1 255.255.255.0
!
interface Ethernet0/3
description LAN Failover Interface
!
interface Management0/0
nameif dmz_1
security-level 25
ip address 10.3.1.1 255.255.255.0
!
boot system disk0:/asa843-k8.bin
07-02-2012 07:04 AM
Strange indeed.
Maybe try a reload and see if it makes any difference if you have the same on another ASA with same firmware and it works just fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide