Migrating from PIX version 6.x to 891 ISR

[paultribe]

Does anyone have information on how to migrate a PIX version 6.3 on to a Cisco 891 router. At the very least I need to know how to configure the following features:

• Firewall.
• NAT and PAT.
• Static NAT with port numbers.
• Remote Access VPN.
• Site to Site VPN.
• Spli Tunnelling.
• AAA Radius Authentication.

Does the 891 support Static NAT with port numbers.

Thanks

Paul

[Panos Kampanakis]

Firewall

Look into Zone Based Firewall http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a008060f6dd.html

NAT and PAT.
Static NAT with port numbers.

NAT on IOS is different. I would suggest to look into ip nat command in IOS and the config guides

Remote Access VPN.
Site to Site VPN.
Spli Tunnelling.

http://www.cisco.com/en/US/docs/security/vpn_modules/6342/vpn_cg.html

AAA Radius Authentication.

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_aaa_overview_external_docbase_0900e4b1805adb64_4container_external_docbase_0900e4b1807af93e.html

I hope it helps.

PK