Monitoring VPNs in a PIX 535 through SNMP

[ccaoto]

Hi,

Is there any way to monitor the state of a VPN (i.e. up/down) using SNMP? which MIBS/traps should I use? Note: we are using a PIX 535 as a terminating point for all the VPNs.

Thanks in advance

[a-vazquez]

There is a page dedicated to this:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftnm_vpn.htm

[ccaoto]

Thank you, this link is excelent, but is there the same information available when we use a PIX as the end point? remember the local VPN termination point is a PIX firewall, and the remote point is administered by another organization.