12-05-2017 05:48 AM - edited 02-21-2020 06:54 AM
Hi all,
Does anyone knows why 2 of my 24 cores aren't used by the appliance?
We are running version 6.1.0.4.
See attached screenshot.
Thanks.
Solved! Go to Solution.
12-05-2017 06:10 PM
I don't see any documented bug on either 6.1.0.4 or 6.1.0.5 related to that symptom.
Either it is a false reading by the GUI (bug) or it is by design (feature). You might be able to verify from the cli using a Linux utility like mpstat.
https://www.cyberciti.biz/tips/how-do-i-find-out-linux-cpu-utilization.html
If that doesn't help, I'd suggest opening a TAC case if you want to know for certain.
12-05-2017 06:10 PM
I don't see any documented bug on either 6.1.0.4 or 6.1.0.5 related to that symptom.
Either it is a false reading by the GUI (bug) or it is by design (feature). You might be able to verify from the cli using a Linux utility like mpstat.
https://www.cyberciti.biz/tips/how-do-i-find-out-linux-cpu-utilization.html
If that doesn't help, I'd suggest opening a TAC case if you want to know for certain.
12-13-2017 01:11 AM
Hello Marvin,
Thank you for your assistance! I'll verify the cores with the tools you provided. If it seems not to be a cosmetical issue, I'll log a TAC case.
Br,
Ruben
12-19-2017 01:59 AM
Hello Marvin,
Using the tools you mentioned, I was able to see there is load on the 2 'unused' cores. However, the load is low (<1%) and therefore, not visible on the graphs in FMC.
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide