Multiple hosts from dmz to outside

[mudasir05]

Hello All,

Could i allow more than one server from a single DMZ port to access the internet via the outside port?

Thanks

[Karsten Iwen]

For sure, just configure one dynamic NAT/PAT for your DMZ subnet or multiple NAT/PAT for each server in the DMZ.

[mudasir05]

thanks Karsten...well in that case will both the servers be connected to the internet and accessed as well from the internet with two different public ips.

In my case I used static Nat however i was able to access both the servers from the internet but failed to access the Internet from the Server.

Thanks

[Karsten Iwen]

If you have static translations in place for your servers, there should only be access-control that limits the connectivity from the servers to the internet. Or it could be a failure in testing the connectivity (for example only with ping instead of "real" traffic).

[mudasir05]

its not only the ping however i couldn't update the server....

[Andre Neethling]

Which software version are you running? You may need to tune your NAT config.