cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1236
Views
0
Helpful
2
Replies

multiple VPNs with IOS Routers on a Central PIX

pambosch
Level 1
Level 1

I have 4 remote Routers (2610 with 12.2 software) and a central PIX 515 (PIX6.1 software) and I want to create VPN tunnels in a HUB-and-SPOKE topology (all the VPNs terminated to the central PIX). When I configure only one VPN on the PIX (for one of the sites) it works great. However, by the time I add a second (or more) VPNs, by adding additional instances in the "crypto map MYVPN....." command, nothing works. The configurations are correct for sure, but I don't know why nothing works when I add more than one VPN on my PIX. Anybody found similar problem?

Appreciate your help.

Thanks

2 Replies 2

pdentico
Level 1
Level 1

You need to give a configuration example of when it works with the one and what you're putting in for the second one.

are you numbering the maps different?

Review Cisco Networking for a $25 gift card