NAC cam failed add access switch

[shairolbit]

hi all,

My problem is i can't  add access switch to the cam using mozilla firefox or IE.here attech file cant add device .Any idea solve my problem?

[Tiago Antunes · Accepted solution]

Hi,

plese note that to add a device (switch) to the CAm, you need to go to OOB Management -> Devices -> New.

You first need to configure the SNMP settings on the switch and CAM so that the CAM and switch can communicate.

I would advise you to make sure you read carefully the configuration guide for OOB ans switch management:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_oob.html.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

[shairolbit]

1. i confused is it authentication vlan same with untrusted(managed) vlan ?

2. Why i can't select or configure antivirus /antispyware inside cam?

[Tiago Antunes]

Hi,

1. i confused is it authentication vlan same with untrusted(managed) vlan ?

[ANS] Correct. The authentication VLAN is the untrusted VLAN.

2. Why i can't select or configure antivirus /antispyware inside cam?

[ANS] Can you please clarify what you mean?

The NAC goal is to create requirements (this is done on the CAM) so that when users connect their PCs to the network they need to authenticate and the machines need to comply with the security requirements configured.

So the requirements (AV/AS updates, etc.) are configured on the CAM:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_agntd.html.

HTH,
Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.