NAC Configuration

[rgobencion]

I have a wireless network that is seen by the VPN 3000 concentrator as one IP address. If I have one person logged onto the vpn and then a second person tries to logon the vpn, the first person gets booted off with a reason 427 error. On the event log of the Cisco VPN concentrator I see an error of NAC is disabled for peer. It seems I cannot have more than person connect to the vpn that is coming from the same IP address. How do I configure my VPN Concentrator to allow for more than one client to connect if they are behind one IP address?

[dsweeny]

This section describes the installation process that you perform to run ACS, which runs on a Windows 2000 Server, Windows 2003, or on a Cisco Secure ACS Solution Engine (ACS SE).

For detailed information on ACS installation, refer to the:

Installation Guide for Cisco Secure ACS for Windows Release 4.1

Installation Guide for Cisco Secure ACS Solution Engine Release 4.1

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_guide_chapter09186a0080731980.html