cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
944
Views
0
Helpful
1
Replies
Beginner

NME-IPS IOS support

I am trying to use NME-IPS module in cisco 2821 running Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T, RELEASE SOFTWARE (fc1)

I haven't inserted the module into router yet.

Do we need to insert NME-IPS module into router before we can use/see the commands like service-module in IOS

At this stage, I don't see any command for NME-IPS

I was expecting to see service-module command .

router#?

Exec commands:

  <1-99>           Session number to resume

  access-enable    Create a temporary Access-List entry

  access-profile   Apply user-profile to interface

  access-template  Create a temporary Access-List entry

  archive          manage archive files

  audio-prompt     load ivr prompt

  auto             Exec level Automation

  beep             Blocks Extensible Exchange Protocol commands

  bfe              For manual emergency modes setting

  calendar         Manage the hardware calendar

  call             Voice call

  ccm-manager      Call Manager Application exec commands

  cd               Change current directory

  clear            Reset functions

  clock            Manage the system clock

  cns              CNS agents

  configure        Enter configuration mode

  connect          Open a terminal connection

  copy             Copy from one file to another

  credential       load the credential info from file system

  crypto           Encryption related commands.

  debug            Debugging functions (see also 'undebug')

  delete           Delete a file

  dir              List files on a filesystem

  disable          Turn off privileged commands

  disconnect       Disconnect an existing network connection

  dot11            IEEE 802.11 commands

  dot1x            IEEE 802.1X Exec Commands

  emadmin          Extension Mobility Commands

  emm              Run a configured Menu System

  enable           Turn on privileged commands

  eou              EAPoUDP

  ephone-hunt      ephone hunt exec command

  erase            Erase a filesystem

  ethernet         Ethernet parameters

  event            Event related commands

  exit             Exit from the EXEC

  file-acct        File mode accounting exec command

  flush            File mode accounting flush options

  format           Format a filesystem

  fsck             Fsck a filesystem

  help             Description of the interactive help system

  if-mgr           IF-MGR operations

  isdn             Run an ISDN EXEC command on an ISDN interface

  license          License information

  lock             Lock the terminal

  login            Log in as a particular user

  logout           Exit from the EXEC

  microcode        microcode commands

  mkdir            Create new directory

  modemui          Start a modem-like user interface

  monitor          Monitoring different system events

  more             Display the contents of a file

  mpls             MPLS commands

  mrinfo           Request neighbor and version information from a multicast router

  mrm              IP Multicast Routing Monitor Test

  mstat            Show statistics after multiple multicast traceroutes

  mtrace           Trace reverse multicast path from destination to source

  name-connection  Name an existing network connection

  no               Disable debugging functions

  ntp              NTP Exec Commands

  partition        Partition disk

  ping             Send echo messages

  ppp              Start IETF Point-to-Point Protocol (PPP)

  pwd              Display current working directory

  radius           radius exec commands

  redundancy       Redundancy Facility (RF) exec commands

  release          Release a resource

  reload           Halt and perform a cold restart

  rename           Rename a file

  renew            Renew a resource

  restart          Restart Connection

  resume           Resume an active network connection

  rlogin           Open an rlogin connection

  rmdir            Remove existing directory

  rsh              Execute a remote command

  send             Send a message to other tty lines

  set              Set system parameter (not config)

  setup            Run the SETUP command facility

  show             Show running system information

  slip             Start Serial-line IP (SLIP)

  spec-file        format spec file commands

  ssh              Open a secure shell client connection

  start-chat       Start a chat-script on a line

  systat           Display information about terminal lines

  tarp             TARP (Target ID Resolution Protocol) commands

  tclquit          Quit Tool Command Language shell

  tclsafe          Tool Command Language shell SAFE mode

  tclsh            Tool Command Language shell

  telnet           Open a telnet connection

  terminal         Set terminal line parameters

  test             Test subsystems, memory, and interfaces

  traceroute       Trace route to destination

  trm              Trend Registration Module

  tunnel           Open a tunnel connection

  udptn            Open an udptn connection

  undebug          Disable debugging functions (see also 'debug')

  upgrade          Upgrade commands

  verify           Verify a file

  vlan             Configure VLAN parameters

  voice            Voice Commands

  vtp              Configure global VTP state

  webvpn           WebVPN exec command

  where            List active connections

  which-route      Do OSI route table lookup and display results

  write            Write running configuration to memory, network, or terminal

  xconnect         Xconnect EXEC commands router#?

1 REPLY 1
Highlighted
Beginner

NME-IPS IOS support

Here are commands under config t

router(config)#?

Configure commands:

  aaa                         Authentication, Authorization and Accounting.

  aal2-profile                Configure AAL2 profile

  access-list                 Add an access list entry

  alarm-interface             Configure a specific Alarm Interface Card

  alias                       Create command alias

  appfw                       Configure the Application Firewall policy

  application                 Define application

  archive                     Archive the configuration

  arp                         Set a static ARP entry

  ase                         Configure ASE

  async-bootp                 Modify system bootp parameters

  auto                        Configure Automation

  autoupgrade                 Auto Upgrade Manager simplifies image upgrade process

  backhaul-session-manager    Configure Backhaul Session Manager

  banner                      Define a login banner

  bba-group                   Configure BBA Group

  beep                        Configure BEEP (Blocks Extensible Exchange Protocol)

  bfd                         BFD configuration commands

  boot                        Modify system boot parameters

  bridge                      Bridge Group.

  buffers                     Adjust system buffer pool parameters

  busy-message                Display message when connection to host fails

  call                        Configure Call parameters

  call-history-mib            Define call history mib parameters

  call-manager-fallback       SRST for Cisco Call Manager fallback. For Cisco Unified

                              Communications Manager Express configuration use the

                              'telephony-service' command

  capf-server                 CAPF Server

  carrier-id                  Name of the carrier associated with this trunk group

  ccm-manager                 Call Manager

  cdp                         Global CDP configuration subcommands

  cef                         Cisco Express Forwarding

  cem                         Configure a specific cem channel

  chat-script                 Define a modem chat script

  class-map                   Configure Class Map

  clns                        Global CLNS configuration subcommands

  clock                       Configure time-of-day clock

  cns                         CNS agents

  config-register             Define the configuration register

  configuration               Configuration access

  connect                     cross-connect two interfaces

  control-plane               Configure control plane services

  credentials                 credentials service

  crypto                      Encryption module

  ctl-client                  CTL Client

  cwmp                        Configure CPE WAN Management Protocol(CWMP)

  default                     Set a command to its defaults

  default-value               Default character-bits values

  define                      interface range macro definition

  dial-control-mib            Define Dial Control Mib parameters

  dial-peer                   Dial Map (Peer) configuration commands

  dialer                      Dialer commands

  dialer-list                 Create a dialer list entry

  dnsix-dmdp                  Provide DMDP service for DNSIX

  dnsix-nat                   Provide DNSIX service for audit trails

  do                          To run exec commands in config mode

  dot11                       IEEE 802.11 config commands

  dot1x                       IEEE 802.1X Global Configuration Commands

  downward-compatible-config  Generate a configuration compatible with older software

  dspfarm                     Enable the dspfarm service

  emm                         Specify pre-loading of MDF

  enable                      Modify enable password parameters

  end                         Exit from configure mode

  eou                         EAPoUDP Global Configuration Commands

  ephone-type                 define ethernet phone type

  errdisable                  Error disable

  ethernet                    Ethernet configuration

  event                       Event related configuration commands

  exception                   Exception handling

  exit                        Exit from configure mode

  fax                         Configure fax parameters

  file                        Adjust file system parameters

  flow                        Global Flow configuration subcommands

  flow-sampler-map            Flow sampler configuration

  format                      Format the output

  frame-relay                 global frame relay configuration commands

  gateway                     Gateway

  gw-accounting               Enable voip gateway accounting.

  help                        Description of the interactive help system

  hostname                    Set system's network name

  http                        HTTP Config

  iapp                        IAPP config commands

  identity                    Identity Configuration Commands

  interface                   Select an interface to configure

  ip                          Global IP configuration subcommands

  ipc                         Configure IPC system

  iphc-profile                Configure IPHC profile

  ipv6                        Global IPv6 configuration commands

  irec-agent                  IREC Agent service

  isis                        Global ISIS configuration subcommands

  iua                         Configure ISDN user Adaptation Layer

  ivr                         ivr utility command

  ixi                         IXI Config command

  kerberos                    Configure Kerberos

  key                         Key management

  kron                        Kron interval Facility

  l2                          Layer 2 configuration

  l2tp-class                  l2tp-class configuration

  li-view                     LI View

  license                     Configure license features

  line                        Configure a terminal line

  load                        Load Protocol

  logging                     Modify message logging facilities

  login                       Enable secure login checking

  login-string                Define a host-specific login string

  mac-address-table           Configure the MAC address table

  macro                       Create a command macro

  map-class                   Configure static map class

  map-list                    Configure static map list

  memory                      Configure memory management

  memory-size                 Adjust memory size by percentage

  menu                        Define a user-interface menu

  mgcp                        Enable Media Gateway Control Protocol

  microcode                   configure microcode

  mls                         mls global commands

  mmoip                       Multi Media Over IP

  modem-pool                  Configure a modem pool

  modemcap                    Modem Capabilities database

  monitor                     Monitoring different system events

  mop                         Configure the DEC MOP Server

  mpls                        Configure MPLS parameters

  mrcp                        MRCP(Real Time Streaming Protocol) configuration

  mta                         Configure the Mail Transfer Agent

  multilink                   PPP multilink global configuration

  netbios                     NETBIOS access control filtering

  netconf                     Configure NETCONF

  network-clock-participate   Participate in Network Clocking

  network-clock-select        Choose system clocking priority

  network-clock-switch        Network clock switch or restore period

  no                          Negate a command or set its defaults

  ntp                         Configure NTP

  num-exp                     Dial Map Number Expansion configuration commands

  object-group                Configure ACL Object Group

  oer                         Optimized Exit Routing configuration submodes

  oer-map                     Create oer-map and enter oer-map command mode

  parameter-map               parameter map

  parser                      Configure parser

  password                    Configure encryption password (key)

  policy-manager              Policy Manager configuration commands

  policy-map                  Configure Policy Map

  port-channel                EtherChannel configuration

  ppp                         PPP global configuration

  presence                    presence service submode

  printer                     Define an LPD printer

  priority-list               Build a priority list

  privilege                   Command privilege parameters

  process                     Configure process

  process-max-time            Maximum time for process to run before voluntarily relinquishing

                              processor

  prompt                      Set system's prompt

  pseudowire-class            Pseudowire-class configuration

  qos                         Setup QoS environment

  queue-list                  Build a custom queue list

  radius-server               Modify RADIUS query parameters

  random-detect-group         Configure random-detect class

  rbe                         Commands for Routing RFC 1483 Ethernet encapsulated packets

  redundancy                  Enter redundancy mode

  regexp                      regexp commands

  resource                    Configure Embedded Resource Manager (ERM)

  resume-string               Define a host-specific resume string

  rif                         Source-route RIF cache

  rlogin                      Rlogin configuration commands

  rmon                        Remote Monitoring

  route-map                   Create route-map or enter route-map command mode

  router                      Enable a routing process

  rtsp                        RTSP(Real Time Streaming Protocol) configuration

  sampler                     Define a Sampler

  sasl                        Configure SASL

  sccp                        Enable Skinny Client Control Protocol

  scheduler                   Scheduler parameters

  scripting                   Configure options for scripting languages

  secure                      Secure image and configuration archival commands

  security                    Infra Security CLIs

  service                     Modify use of network based services

  settlement                  Configure a specific settlement

  sgbp                        SGBP Stack Group Bidding Protocol configuration

  shutdown                    Shutdown system elements

  signaling-class             Configure signaling class

  sip-ua                      SIP User Agent (UA)

  snap                        SNAP configuration

  snmp                        Modify non engine SNMP parameters

  snmp-server                 Modify SNMP engine parameters

  sntp                        Configure SNTP

  source-bridge               Source-route bridging ring groups

  spanning-tree               Spanning Tree Subsystem

  srcp                        Enable Simple Resource Coordination Protocol

  ssg                         Service Selection Gateway

  stackmaker                  Specify stack name and add its member

  stacks                      Configure stacks

  standby                     Global HSRP configuration commands

  state-machine               Define a TCP dispatch state machine

  stcapp                      Start SCCP Telephony Control Application

  subscriber                  Subscriber configuration

  subscriber-policy           Subscriber policy

  subscription                ASNL based Subscriptions configuration

  table-map                   Configure Table Map

  tacacs-server               Modify TACACS query parameters

  tarp                        Global TARP configuration subcommands

  telephony-service           Configure Cisco Unified Communications Manager Express

  template                    Select a template to configure

  terminal-queue              Terminal queue commands

  tftp-server                 Provide TFTP service for netload requests

  tgrep                       Enable TGREP

  tidp                        Configure TIDP services

  time-range                  Define time range entries

  track                       Object tracking configuration commands

  translate                   Translate global configuration commands

  translation-rule            Global digit manipulation and translation

  trunk                       Global trunk configuration

  user-group                  User Group Configuration Commands

  username                    Establish User Name Authentication

  vc-group                    Define a Frame Relay VC group

  virtual-profile             Virtual Profile configuration

  virtual-template            Virtual Template configuration

  vlan                        VLAN commands

  vm-integration              enable in-band DTMF integration with voicemail systems

  voice                       Global voice configuration

  voice-card                  Configure a specific voice-card

  voice-gateway system        Configure Analog Voice Gateway of type 202/204/224

  voip-incoming               Global incoming VoIP configuration

  vpdn                        Virtual Private Dialup Network

  vpdn-group                  VPDN group configuration

  vpdn-template               vpdn-template configuration

  vrf                         VRF commands

  vtp                         Configure global VTP state

  vty-async                   Enable virtual async line configuration

  vxml                        VXML Interpreter configuration commands

  warm-reboot                 Warm reboot allows quick reload in case of a crash or by request

  webvpn                      SSL VPN Commands

  wrr-queue                   Configure weighted round-robin xmt queues

  wsma                        Configure Web Services Management Agents

  x25                         X.25 Level 3

  xconnect                    Xconnect config commands

  xot                         Global XOT commands

  zone                        FW with zoning

  zone-pair                   Zone pair command

router(config)#?

Configure commands:

  aaa                         Authentication, Authorization and Accounting.

  aal2-profile                Configure AAL2 profile

  access-list                 Add an access list entry

  alarm-interface             Configure a specific Alarm Interface Card

  alias                       Create command alias

  appfw                       Configure the Application Firewall policy

  application                 Define application

  archive                     Archive the configuration

  arp                         Set a static ARP entry

  ase                         Configure ASE

  async-bootp                 Modify system bootp parameters

  auto                        Configure Automation

  autoupgrade                 Auto Upgrade Manager simplifies image upgrade process

  backhaul-session-manager    Configure Backhaul Session Manager

  banner                      Define a login banner

  bba-group                   Configure BBA Group

  beep                        Configure BEEP (Blocks Extensible Exchange Protocol)

  bfd                         BFD configuration commands

  boot                        Modify system boot parameters

  bridge                      Bridge Group.

  buffers                     Adjust system buffer pool parameters

  busy-message                Display message when connection to host fails

  call                        Configure Call parameters

  call-history-mib            Define call history mib parameters

  call-manager-fallback       SRST for Cisco Call Manager fallback. For Cisco Unified

                              Communications Manager Express configuration use the

                              'telephony-service' command

  capf-server                 CAPF Server

  carrier-id                  Name of the carrier associated with this trunk group

  ccm-manager                 Call Manager

  cdp                         Global CDP configuration subcommands

  cef                         Cisco Express Forwarding

  cem                         Configure a specific cem channel

  chat-script                 Define a modem chat script

  class-map                   Configure Class Map

  clns                        Global CLNS configuration subcommands

  clock                       Configure time-of-day clock

  cns                         CNS agents

  config-register             Define the configuration register

  configuration               Configuration access

  connect                     cross-connect two interfaces

  control-plane               Configure control plane services

  credentials                 credentials service

  crypto                      Encryption module

  ctl-client                  CTL Client

  cwmp                        Configure CPE WAN Management Protocol(CWMP)

  default                     Set a command to its defaults

  default-value               Default character-bits values

  define                      interface range macro definition

  dial-control-mib            Define Dial Control Mib parameters

  dial-peer                   Dial Map (Peer) configuration commands

  dialer                      Dialer commands

  dialer-list                 Create a dialer list entry

  dnsix-dmdp                  Provide DMDP service for DNSIX

  dnsix-nat                   Provide DNSIX service for audit trails

  do                          To run exec commands in config mode

  dot11                       IEEE 802.11 config commands

  dot1x                       IEEE 802.1X Global Configuration Commands

  downward-compatible-config  Generate a configuration compatible with older software

  dspfarm                     Enable the dspfarm service

  emm                         Specify pre-loading of MDF

  enable                      Modify enable password parameters

  end                         Exit from configure mode

  eou                         EAPoUDP Global Configuration Commands

  ephone-type                 define ethernet phone type

  errdisable                  Error disable

  ethernet                    Ethernet configuration

  event                       Event related configuration commands

  exception                   Exception handling

  exit                        Exit from configure mode

  fax                         Configure fax parameters

  file                        Adjust file system parameters

  flow                        Global Flow configuration subcommands

  flow-sampler-map            Flow sampler configuration

  format                      Format the output

  frame-relay                 global frame relay configuration commands

  gateway                     Gateway

  gw-accounting               Enable voip gateway accounting.

  help                        Description of the interactive help system

  hostname                    Set system's network name

  http                        HTTP Config

  iapp                        IAPP config commands

  identity                    Identity Configuration Commands

  interface                   Select an interface to configure

  ip                          Global IP configuration subcommands

  ipc                         Configure IPC system

  iphc-profile                Configure IPHC profile

  ipv6                        Global IPv6 configuration commands

  irec-agent                  IREC Agent service

  isis                        Global ISIS configuration subcommands

  iua                         Configure ISDN user Adaptation Layer

  ivr                         ivr utility command

  ixi                         IXI Config command

  kerberos                    Configure Kerberos

  key                         Key management

  kron                        Kron interval Facility

  l2                          Layer 2 configuration

  l2tp-class                  l2tp-class configuration

  li-view                     LI View

  license                     Configure license features

  line                        Configure a terminal line

  load                        Load Protocol

  logging                     Modify message logging facilities

  login                       Enable secure login checking

  login-string                Define a host-specific login string

  mac-address-table           Configure the MAC address table

  macro                       Create a command macro

  map-class                   Configure static map class

  map-list                    Configure static map list

  memory                      Configure memory management

  memory-size                 Adjust memory size by percentage

  menu                        Define a user-interface menu

  mgcp                        Enable Media Gateway Control Protocol

  microcode                   configure microcode

  mls                         mls global commands

  mmoip                       Multi Media Over IP

  modem-pool                  Configure a modem pool

  modemcap                    Modem Capabilities database

  monitor                     Monitoring different system events

  mop                         Configure the DEC MOP Server

  mpls                        Configure MPLS parameters

  mrcp                        MRCP(Real Time Streaming Protocol) configuration

  mta                         Configure the Mail Transfer Agent

  multilink                   PPP multilink global configuration

  netbios                     NETBIOS access control filtering

  netconf                     Configure NETCONF

  network-clock-participate   Participate in Network Clocking

  network-clock-select        Choose system clocking priority

  network-clock-switch        Network clock switch or restore period

  no                          Negate a command or set its defaults

  ntp                         Configure NTP

  num-exp                     Dial Map Number Expansion configuration commands

  object-group                Configure ACL Object Group

  oer                         Optimized Exit Routing configuration submodes

  oer-map                     Create oer-map and enter oer-map command mode

  parameter-map               parameter map

  parser                      Configure parser

  password                    Configure encryption password (key)

  policy-manager              Policy Manager configuration commands

  policy-map                  Configure Policy Map

  port-channel                EtherChannel configuration

  ppp                         PPP global configuration

  presence                    presence service submode

  printer                     Define an LPD printer

  priority-list               Build a priority list

  privilege                   Command privilege parameters

  process                     Configure process

  process-max-time            Maximum time for process to run before voluntarily relinquishing

                              processor

  prompt                      Set system's prompt

  pseudowire-class            Pseudowire-class configuration

  qos                         Setup QoS environment

  queue-list                  Build a custom queue list

  radius-server               Modify RADIUS query parameters

  random-detect-group         Configure random-detect class

  rbe                         Commands for Routing RFC 1483 Ethernet encapsulated packets

  redundancy                  Enter redundancy mode

  regexp                      regexp commands

  resource                    Configure Embedded Resource Manager (ERM)

  resume-string               Define a host-specific resume string

  rif                         Source-route RIF cache

  rlogin                      Rlogin configuration commands

  rmon                        Remote Monitoring

  route-map                   Create route-map or enter route-map command mode

  router                      Enable a routing process

  rtsp                        RTSP(Real Time Streaming Protocol) configuration

  sampler                     Define a Sampler

  sasl                        Configure SASL

  sccp                        Enable Skinny Client Control Protocol

  scheduler                   Scheduler parameters

  scripting                   Configure options for scripting languages

  secure                      Secure image and configuration archival commands

  security                    Infra Security CLIs

  service                     Modify use of network based services

  settlement                  Configure a specific settlement

  sgbp                        SGBP Stack Group Bidding Protocol configuration

  shutdown                    Shutdown system elements

  signaling-class             Configure signaling class

  sip-ua                      SIP User Agent (UA)

  snap                        SNAP configuration

  snmp                        Modify non engine SNMP parameters

  snmp-server                 Modify SNMP engine parameters

  sntp                        Configure SNTP

  source-bridge               Source-route bridging ring groups

  spanning-tree               Spanning Tree Subsystem

  srcp                        Enable Simple Resource Coordination Protocol

  ssg                         Service Selection Gateway

  stackmaker                  Specify stack name and add its member

  stacks                      Configure stacks

  standby                     Global HSRP configuration commands

  state-machine               Define a TCP dispatch state machine

  stcapp                      Start SCCP Telephony Control Application

  subscriber                  Subscriber configuration

  subscriber-policy           Subscriber policy

  subscription                ASNL based Subscriptions configuration

  table-map                   Configure Table Map

  tacacs-server               Modify TACACS query parameters

  tarp                        Global TARP configuration subcommands

  telephony-service           Configure Cisco Unified Communications Manager Express

  template                    Select a template to configure

  terminal-queue              Terminal queue commands

  tftp-server                 Provide TFTP service for netload requests

  tgrep                       Enable TGREP

  tidp                        Configure TIDP services

  time-range                  Define time range entries

  track                       Object tracking configuration commands

  translate                   Translate global configuration commands

  translation-rule            Global digit manipulation and translation

  trunk                       Global trunk configuration

  user-group                  User Group Configuration Commands

  username                    Establish User Name Authentication

  vc-group                    Define a Frame Relay VC group

  virtual-profile             Virtual Profile configuration

  virtual-template            Virtual Template configuration

  vlan                        VLAN commands

  vm-integration              enable in-band DTMF integration with voicemail systems

  voice                       Global voice configuration

  voice-card                  Configure a specific voice-card

  voice-gateway system        Configure Analog Voice Gateway of type 202/204/224

  voip-incoming               Global incoming VoIP configuration

  vpdn                        Virtual Private Dialup Network

  vpdn-group                  VPDN group configuration

  vpdn-template               vpdn-template configuration

  vrf                         VRF commands

  vtp                         Configure global VTP state

  vty-async                   Enable virtual async line configuration

  vxml                        VXML Interpreter configuration commands

  warm-reboot                 Warm reboot allows quick reload in case of a crash or by request

  webvpn                      SSL VPN Commands

  wrr-queue                   Configure weighted round-robin xmt queues

  wsma                        Configure Web Services Management Agents

  x25                         X.25 Level 3

  xconnect                    Xconnect config commands

  xot                         Global XOT commands

  zone                        FW with zoning

  zone-pair                   Zone pair command