08-04-2017 07:04 PM - edited 03-12-2019 02:46 AM
I have setup a PC under my network with a public IP Address but is not getting connectivity.
(Attached diagram)
I believe I need to allow the traffic in ASA device but I dont know.
Any help will be greateful
Solved! Go to Solution.
08-07-2017 09:20 AM
Hi,
Do you have a Dynamic NAT for the traffic to access
Regards,
Aditya
Please rate helpful and mark correct answers
08-04-2017 09:25 PM
Hi,
When you say no connectivity what are you testing?
Are you able to ping Internet or you are not able to browse websites?
Please elaborate.
Regards,
Aditya
Please rate helpful and mark correct answers
08-07-2017 09:03 AM
Hi,
I cannot ping or browse any website from the PC
I dont know if I need to allow access from the firewall if that so what would be the command?
Thanks
08-07-2017 09:20 AM
Hi,
Do you have a Dynamic NAT for the traffic to access
Regards,
Aditya
Please rate helpful and mark correct answers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide