Open port to specific IP address on the internet

[dalibor.bosic11]

Hi

I am just in process of learning ASA Appliances so one of the question I would have along the way is

For example I have inside server that is supposed to contact server at outside IP address for example 167.28.32.89 which I would use as public IP address. Inside server has private IP address like 192.168.10.50.

This server is supposed to be able to talk to above mentioned public IP address on ports 443 and 8443.

the way I would go about it is to create access rule from inside using network object for inside server and network object for outside server.

Is it possible to create network group name it and assign Public IP address to that address 167.28.32.90 which would be public IP address

[Rishabh Seth]

Hi,

You can refer following link to understand the basic configuration required on ASA, 

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz-00.html

Thanks,

Rishabh Seth

Rate if it helps!