08-08-2008 10:37 AM - edited 03-11-2019 06:28 AM
i have 10 locations with pix 501's and a VPN tunnel built to my main network witch is at a data-center. my main network at he data-center has a pix 506E
is there any way to tell how much bandwidth each location is eatting up?
08-11-2008 02:00 AM
Hi,
No, the PIX will not allow you to set that up (at least not the 6.x IOS).
You can use device like PacketShaper to shape the traffic, or you can use a SNMP server to get the info from the PIX a build the statistics.
Please rate if this helped.
Regards,
Daniel
08-11-2008 05:01 AM
i am assuming u use pix 7.x
in this case u can achive it by useing policing and matcing based on the configured vpn tunnle groups
and the fpllowing link useful
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml
please, if helful rate
08-11-2008 10:48 PM
Hi,
PIX 506E does not support 7.x IOS
Cheers,
Daniel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide