10-31-2019 10:14 PM - edited 10-31-2019 10:15 PM
This is an ASA access list question. Why am I not able to ping the host in the DMZ from the host in the OUTSIDE? I have ACL's configured to allow ICMP, so not sure what I'm missing here.
11-01-2019 01:31 AM
Hi there,
Try the following configuration command:
! fixup protocol icmp !
...to enable inspection of ICMP.
cheers,
Seb.
11-01-2019 05:29 AM
Thanks, however applying that command did not change the behavior. Also, i had already added "inspect icmp" to the MPF.
11-01-2019 10:43 AM
1. Check Identity NAT rule on ASA
2. Check route on Client
3. Check, if there is personal FW on Client
11-05-2019 05:36 AM - edited 11-05-2019 05:37 AM
Hi there,
Would it be possible to share more of the config?
Musing, but let me know if any of the following isn't on track -
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide