cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
683
Views
0
Helpful
1
Replies

Outside with multiple IP public

                   Hi I am Jonathan Rivero and I am NEW on ASAs, I have ASA 5520 with Version 8.2(5), the ISP give me a block of IP pubic (201.148.156.193/28), one IP valid (201.148.156.194) have the Global NAT (all users LAN) and server FTP, but i need that IP 201.148.156.195 is used for VCSe, and the IP 201.148.156.196 is used for other server FTP.

Attach the show run.

someone help me?

thk for help me

1 Accepted Solution

Accepted Solutions

Julio Carvajal
VIP Alumni
VIP Alumni

Hello Josue,

Do the following

static (inside,outside) 201.148.156.195 VCSE_INTERNAL_IP

static (inside,outside) 201.148.156.196 FTP_internal_IP

access-list Out_In extended permit tcp any host 201.148.156.196 eq 21

***Create the ACL for the VCSE traffic as well************

Regards,

Remember to rate all of the support forum answers.

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

1 Reply 1

Julio Carvajal
VIP Alumni
VIP Alumni

Hello Josue,

Do the following

static (inside,outside) 201.148.156.195 VCSE_INTERNAL_IP

static (inside,outside) 201.148.156.196 FTP_internal_IP

access-list Out_In extended permit tcp any host 201.148.156.196 eq 21

***Create the ACL for the VCSE traffic as well************

Regards,

Remember to rate all of the support forum answers.

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Review Cisco Networking for a $25 gift card