cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Packet Capture Destination IP on ASA

mahesh18
Frequent Contributor
Frequent Contributor

Hi All,

For packet capture on ASA i have questions below to understand it better

If i need to capture the packet on ASA  then the destination IP can be any IP  --  means IP of PC,Server,Router interface ,Switch interface

Also for destination IP the ASA should  need to have route to the destination or not in its routing table ? or it should have default route ?

Thanks

MAhesh

1 ACCEPTED SOLUTION

Accepted Solutions

Julio Carvajal
Advisor
Advisor

Hello Mahesh,

That is correct you can set the destination as any you want ( any being any packet traversing the ASAdestined to any IP address on the world)

The asa does not need to have a route to the destination, the packet wil be capture as long as the packet traverses the ASA.

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

3 REPLIES 3

Julio Carvajal
Advisor
Advisor

Hello Mahesh,

That is correct you can set the destination as any you want ( any being any packet traversing the ASAdestined to any IP address on the world)

The asa does not need to have a route to the destination, the packet wil be capture as long as the packet traverses the ASA.

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

Hi Julio,

Many thanks again for quick reply.

Will ask many more questions as i have to support ASA in my new job.

Thanks

MAhesh

My pleasure to help Mahesh

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: