At the moment we can make the control connection but when we issue commands the connection times out.
Looking at the logs we can see the initial connection made to the server on port 21 from the client, this is also seen on the second firewall context (nearest the FTP server). The data channel is then seen on the first context, made using high src & dst port numbers and initiated from the client, successfully passing the ACL/Inspection, then on the second context we see the connection being denied by the incoming ACL on the second contexts interface connected to the VRF instance.
The rules are identical on the contexts and have been made by copying and paste the rule using CSM, we are using the predefined service group 'FTP-Group' which contains both tcp 20 & 21. FTP inspection is at default on both contexts.
We have tested with Win XP (capable of Active FTP only) & Firefox 3.6.12 which is the connections we are seeing in the logs trying to do Passive FTP.
Is this a problem with teh contexts randomizing sequence numbers or TCP Normalization? Or do we just have a problem with the Inspection engine on one of the contexts (I would have expected to see this on both contexts if it was a bug).
Any help gratefully received as it is doing my nut in.
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to leverage Microsoft Single Sign-On for multiple ISE Portals (for example Sponsor and Guest/BYOD Portals).
At the time of this writing, ISE cann...
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to create a BYOD Flow to provide Wireless network access using an employee’s Azure AD credentials.
The table below shows the whole Cisco Security solutions + Splunk integrations add-ons. Kindly let me know if I have missed some add-ons or if there are any new updates. Thank you!
Hope this will be helpful for everyone who is looking for Splunk in...
A python based script to generate report if there are disabled rules under an Access Control Policy and an option to delete those rules in bulk.
Step 1 Download the script on PCStep 2 Make sure python3 is installed on PC and have reach...
A python based script to generate report if there are double logging on FMC ACP (logging at beginning and end), having rule action "Allow" or "Trust". (Option1 )
Also, the logging at the begging will be disabled if logging is detected for both beginning ...