PBR on FPR1140 6.6.0

[andy_4578]

Hi,

Can anyone point us in the right direction to setup Policy Based Routing on an fpr1140 via the FDM?

We cant use the FMC as we dont have a virtual platform compatible (Hyper-V).

The FPR's are running software version 6.6.0, according to this article it is possible via the FDM - https://www.cisco.com/c/en/us/td/docs/security/firepower/660/fdm/fptd-fdm-config-guide-660/fptd-fdm-routing.html

But there's no examples on how to achieve it via flexconfig

[andy_4578 · Accepted solution]

For anyone else that needs to configure PBR via the FDM it is possible.

Configure an extended acl via the Smart CLI objects

Configure a Route map via the Smart CLI objects

Configure a flexconfig object to apply the routemap to an interface

Deploy the config