Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We need to find a way of bypassing 802.1x port authentication for Avaya IP phones. The switch ports on our Cisco 9200 switches all have 802.1x authentication with NPS acting as the radius (No ISE or ACS servers).
This works fine for PC's/Laptops whe...
We've deployed an FTDv in Azure which appears to be working okay and has internet access through the associated Azure public IP on the outside interface. The VM's only seem to work when the default routes are supplied via Azure and use the Azure Inte...
Hi, Can anyone point us in the right direction to setup Policy Based Routing on an fpr1140 via the FDM? We cant use the FMC as we dont have a virtual platform compatible (Hyper-V). The FPR's are running software version 6.6.0, according to this artic...
Were trying to set up Anyconnect ssl VPN to use certificate auth which is working although the user has to choose the certificate during the connection process rather than an automated process. At the moment Anyconnect prompts during the connection p...
We currently operate a "Tunnel All" policy for vpn traffic due to conditional access of hosted applications (Traffic must come from the head Office IP). What were finding with the increase in remote workers with fast home connections is there saturat...
Anyconnect or secure client should be running as a service, the application doesn't need to be running as well. As a test, close the application and make sure it is closed, not hiding in the system tray. If it is hiding in the system tray, close it ...
The fix for us was to remove anyconnect from the client startup, either through task manager or a registry change. We push the registry change via intune
Hi All,
Thanks for the responses, im still working on getting MAB working with NPS, without the phone in play 802.1x works perfectly along with automatic vlan assignment - adding the phone to the mix just shuts down the switchport at the point the ph...
Was a solution found? were experiencing the exact same issue with the management tunnel where the AnyConnect client will randomly popup trying to manually connect, this disconnects the Management tunnel until you cancel the AnyConnect connection. Th...
Hi, Initially, we were simply trying to get the Azure VM's to go through the vFTD for there internet access so the dynamic NAT rule should have been fine, there wasn't any VPN's configured at that stage so no need for LAN to LAN traffic being exempt....
