04-17-2005 08:49 PM - edited 02-21-2020 12:05 AM
Hi,
We replace PIX 634 with PIX 701 and PDM version 302 with 303.
We are now unable to access the PDM via a browser (which worked under the previous versions).
This message is being returned
404 Not Found
The requested URL /admin/index.html was not found on this server.
Martin
04-17-2005 08:52 PM
I forgot to mention the box is a PIX 515E
04-17-2005 09:43 PM
Hi, Martin
PDM does not work with 7.0.1. It was replaced with ASDM (Adaptive Security Device Manager). Go ahead and download it from CCO (asdm-501.bin); I think the 'copy tftp flash:asdm' command will work from the configuration mode. When you're done, make sure that you also enter the command 'asdm image flash:/asdm-501.bin' in order for the ASDM to load properly.
Hope that helps!
Federico Rodriguez
04-17-2005 10:51 PM
Thanks for pointing that out.
I have been able to install asdm. But have trouble trying to execute the asdm command, this seems to be the only available option under the privileged rights.
adcisco# asdm ?
disconnect Specify ASDM session id to be disconnected after this keyword
This message is returned when trying to execute the command you suggested. It is the same instruction as in the asdm manual.
radcisco# asdm image flash:/asdm-501.bin
^
ERROR: % Invalid input detected at '^' marker.
04-17-2005 11:38 PM
Hello,
That is a config mode command:
pix(config)# asdm image flash:/asdm.bin
HTH,
Mustafa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide