09-20-2012 07:02 PM - edited 03-11-2019 04:57 PM
I'm just starting off on ASA's and i'm out of ideas here with this problem. I simply want to be able to ping from inside to dmz and vice versa. At this time i don't have any servers in the dmz except for the dmz interface which is 172.16.100.254, my inside network is 192.168.50.x.
I think i may have my static nat incorrect. if anyone could shed some light on this i would greatly appreciate it. I've also read numerous other discussions online but each one differs from the other.
Thanks all,
Cesar
--------------------------------------------------------------------------------------------------------------------------------------------------------------
ASA Version 8.2(5)
!
hostname clabsasa
domain-name clabs.com
enable password fSi.GJ38BR0IplZP encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.50.253 inside description inside
!
interface Ethernet0/0
nameif outside
security-level 0
ip address dhcp setroute
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.50.254 255.255.255.0
!
interface Ethernet0/2
description DMZ
nameif DMZ
security-level 50
ip address 172.16.100.254 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
boot system disk0:/asa825-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns server-group DefaultDNS
domain-name clabs.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list 101 extended permit ip any any
pager lines 24
logging enable
logging asdm warnings
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp deny any outside
icmp permit any echo inside
icmp permit any echo-reply inside
icmp permit any time-exceeded inside
icmp permit any inside
icmp permit any echo DMZ
icmp permit any echo-reply DMZ
icmp permit any DMZ
icmp permit any time-exceeded DMZ
asdm image disk0:/asdm-649-103.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,DMZ) 192.168.50.0 192.168.50.0 netmask 255.255.255.0
access-group 101 in interface DMZ
!
router eigrp 100
network 172.16.0.0 255.255.0.0
!
route outside 0.0.0.0 255.255.255.255 192.168.50.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.50.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.50.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 8.8.4.4
!
dhcpd address 192.168.50.100-192.168.50.199 inside
dhcpd enable inside
!
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp authenticate
ntp server 38.106.177.10 prefer
webvpn
username admin1 password 9tVcm8CVRD8uUKqw encrypted privilege 15
username cesarc password K0uqAPPfLclLg3xy encrypted privilege 15
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
09-20-2012 08:49 PM
Hello Cesar,
Looks good the configuration
You said you do not have any host on the DMZ
If you are trying to ping the DMZ interface from an inside host that will not work as you cannot ping a far end interface.
Place a host on the DMZ interface and run a test.
Any other question...Sure..Just rate all of my answers.
Regards,
Julio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide