PIX 501 Logging into DSL ISP

[donbyng00]

I need to enter a username and password to access the Internet through our ISP. How do I get the PIX 501 to do this?

[hemendoz]

Hello donbyng00,

If you are doing PPPoE, then this link should help

Configuring the PPPoE Client on a Cisco Secure PIX Firewall

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801055dd.shtml

vpdn group pppoex request dialout pppoe

vpdn group pppoex localname cisco

vpdn group pppoex ppp authentication pap

vpdn username cisco password *********

Hope that helps! If so, please rate.

Thanks

[donbyng00]

hemendoz thank you so much for your help. I checked out the hyperlink and found another as well in a different posting...

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/pixclnt.htm#40037

have a great evening.