06-03-2003 02:45 AM - edited 02-20-2020 10:46 PM
I am a cisco firewall beginer .
I have a problem with configuration of cisco 501.
I have 1 public IP and i want redirect ports in more internal IP with the NAT.
Is it possible?
How Can I do?
Please Help me!
I thank you in advance.
06-03-2003 02:52 AM
Hi,
you can use PAT for this case...
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/config/bafwcfg.htm
this document will be helpful for your configuration..
Regards
Kiruba
06-03-2003 03:01 AM
Hi ,
USe the following commands for our configuration.Hope this may help
nameif ethernet0 outside security0
nameif ethernet1 inside security100
ip address outside
ip address inside
nat (inside) 1 0 0
global (outside) 1
route outside 0.0.0.0 0.0.0.0
-\Kiruba
06-03-2003 03:11 AM
Thanks for your help but i can't understand how it works,
can you give me an example of a working configuration?
My problem:
mail server internal IP x.x.x.25
ftp server internal IP x.x.x.26
external IP 189.25.x.x
How can I do?
Thank for reply me!
06-03-2003 03:28 AM
Hi,
I think it's not possible to do static map for 2 internal host to a single external IP address..You need 2 external Ip addresses ...
Regards
Kiruba
06-03-2003 04:10 AM
thanks for your help!
a possible solution is the router in internal LAN?
-->Router --> Cisco 501-> router ADSL-> outside
| |
y y
ftp mail
Is it possible?
thank you in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide