Pix 501 Upgrade
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-22-2012 03:39 PM - edited 03-11-2019 04:45 PM
I'm curious to find out if my PIX 501 has any upgrade available.
Here is my sh run
Thanks
pixfirewall(config)# sh ver
Cisco PIX Firewall Version 6.3(5)
Cisco PIX Device Manager Version 3.0(4)
Compiled on Thu 04-Aug-05 21:40
Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz
Flash E28F640J3 @ 0x3000000, 8MB
BIOS Flash E28F640J3 @ 0xfffd8000, 128KB
0: ethernet0: address is 0013.60f6.392f, irq 9
1: ethernet1: address is 0013.60f6.3931, irq 10
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Enabled
Maximum Physical Interfaces: 2
Maximum Interfaces: 2
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: 50
Throughput: Unlimited
IKE peers: 10
This PIX has a Restricted (R) license.
Serial Number: 809073755 (0x30397c5b)
Running Activation Key: 0xb04c6387 0x423725f9 0xf1defea5 0xd2107017
Configuration last modified by enable_15 at 14:10:05.164 UTC Mon Jan 23 2012
- Labels:
-
NGFW Firewalls
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-22-2012 08:09 PM
Hi Alex,
The final release for pix- 8.0.4 (released in 2009). ASA replaced PIX.
hth
MS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-22-2012 11:37 PM
no, there is nothing newer for your PIX. The 501 and 506 are not able to run any newer versions as the bigger devices like 515, 525, ... do.
Sent from Cisco Technical Support iPad App
