cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2107
Views
0
Helpful
19
Replies

PIX 515: Help adding a line to the access list

salixcapital
Beginner
Beginner

Hi, I need to open a port on a PIX 515.

Please can someone explain what I should be entering including the commands.


For the purposes of the explanation (so I can understand it ) I've given the different elements the following ips

Port = PPPPP

Destination IP that the machine s on my network will be contacting: XXX.XXX.XXX.XXX

The workstation on my network YYY.YYY.YYY.YYY

PIX IP: ZZZ.ZZZ.ZZZ.ZZZ

I have logged onto the PIX via Hyperterminal.

Thanks for your help.

19 Replies 19

Marcin Latosiewicz
Cisco Employee
Cisco Employee

Hmmmmmm wouldn't it be better to use ASDM or PDM if you don't know how to do it from CLI?

What's the software version?

7.0+ versions support "line" argument when defining access-list entries.

Marcin

I'm on 6.3

I can access the list and add the entry (i think) but how do i then save it? Does the firewall need a power cycle for it to work or will 'reload' work?

I don't see why a reload would be needed.

I've checked comm reff for 6.3

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/ab.html#wp1067755

it does support "line" argeument.

access-list NAME line X permit/deny etc etc....

write term brings up an long access list for in and out but show access-lists in only has two lines in it. How can this be?

Show us the running config :-)

the entries come in in the in and out access lists but the port is still closed