03-05-2002 01:13 AM - edited 02-20-2020 09:59 PM
I have 2 Pix 515 firewalls absolutly identical in every way even the configs.
They are both completly stand alone and one will be used as a reserve.
The problem I am having is since making a couple of odd configuration changes to one of the pixs (remeber both configs are identical)one will just not work at all.
Only 1 will ever be on the network at once so IP clashes will not be a problem.
With the one that will not work i have Tried WRI MEM,
Reload, even rebooted the router to the outside world in case of it hanging onto MAC adresses.
I would love any comments or sugesstions that could help.
Thanks
Mark Warwick
03-05-2002 05:50 AM
Without knowing the changes, print out both configs and check for the 5th time to see if they are exact.
03-05-2002 05:58 AM
How about copying the config of the working one to a text file, going to config t on the non-working one and pasting the config from the working one into it?
03-06-2002 09:09 PM
try clear cam on the switch, if there is a switch coming into the picture... i have solved at least five problems just with this!!
03-06-2002 09:47 PM
sorry about that.. it is not clear cam.. it is clear arp on the switch...
Best Regards / Sampath.
SampathSR@yahoo.com, New York, NY.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide