06-21-2010 11:50 PM - edited 03-11-2019 11:02 AM
Hi folks!
Got a PIX 515E firewall with an Unrestricted license. I want to upgrade it to 3DES encryption. I register for the upgrade on the Cisco web site, it recognizes the serial number, and I'm sent an activation key. However, when I go to enter that activation key, it tells me that it is going to DOWNGRADE the license to a Restricted license.
How do I get upgraded to 3DES without losing my Unrestricted license?
(BTW, this unit is not under warranty or support contract, so I cannot call Cisco for help. But since this is a freely available upgrade, I wouldn't think I should need to.)
Thanks!
- Tom
Solved! Go to Solution.
06-22-2010 02:24 AM
Please email licensing@cisco.com with your current "show version" output, and advise the licensing team that you would like to upgrade to the 3DES license and keep the Unrestricted license. They will cut you the right activation key.
Hope that helps.
06-22-2010 02:24 AM
Please email licensing@cisco.com with your current "show version" output, and advise the licensing team that you would like to upgrade to the 3DES license and keep the Unrestricted license. They will cut you the right activation key.
Hope that helps.
06-23-2010 09:43 AM
Thank you very much for your help!
I e-mailed them as you suggested and eventually got a follow-up phone call from one of their support engineers. For some reason, they had the wrong type of license connected with our firewall's serial number in their database. They had their licensing team generate the correct activation key for Unrestricted with 3DES and all is well.
Thanks again!
- Tom
06-23-2010 02:57 PM
Excellent, good to hear.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide