pix 515e firewall load a new configuration

[jshupert]

friends

Goal: migrate a pix configuration from pix 515e number 1  to another pix 515e number 2

i have a pix 515e firewall

I have saved the configuration by

opening a hyper terminal session to the pix ( number 1 )

and capturing into a txt file a sho conf

I now have a good_1.txt

I wish to load this into a second ( number 2 ) pix 515e ..they have the same vers software.

I wish to

open a hyper terminal session to this second pix and

then paste from my " good_1.txt"  into the second pix .

Q- how do I "clear " pix number 2

i do not want to return ALL the way to default.

i simply wish to ....wash out the current conf t  and paste in this second one.

my goal is to have 2 different pix 515 e with the same configuration

thanks

js

[Philip D'Ath]

Use the "write ease" command and the reboot.  If asked, do not save the current config.

The PIX 515E went "end of life" a very long time ago.  Even a baby ASA 5506 would probably cream it performance wise.