cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
301
Views
0
Helpful
1
Replies

PIX 515e Hangs when removing NTP Server Setting

craig-allen
Level 1
Level 1

PIX 515e 64Mb RAM running 6.3.(3)

When I issue the following command:

no ntp server <ip address>

The ssh or telnet session hangs; I then have to manually close the associated program and then reconnect to the PIX i.e a new session. I've also done a reboot and then tried the above to no avail. I've even tried using PDM with no success.

I have 2 NTP Servers I would like to remove but unable due to this hanging issue.

At this stage it's not possible to upgrade but will consider this option is the above is a bug within 6.3.(3) and is resolved in an updated version.

Anyone have any ideas I might try?

1 Reply 1

craig-allen
Level 1
Level 1

Problem resolved by upgrading to 6.3(5)

Review Cisco Networking for a $25 gift card