cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
395
Views
0
Helpful
3
Replies

Pix 515e/Router 2600 comms

echelon360
Level 1
Level 1

Hi guys,i seem to be having a problem getting comms between the two devices.

Setup

i have a host a (172.16.25.115) that resides in the inside (interface e1) of the Pix.From the pix (interface e4) i have a direct connection to a router (172.16.25.194)

I have enabled a route to network 10.65.0.0 via Router int e1/2

Problem

I cannot get host A to the 10.65.0.0 network.From host A,i can ping the router but i can't get beyond.

From a host in network 10.65.0.0 i can't get into the pix.I have enabled the necessary acl on the pix interface.

I'm attaching my router config,any advise given would be appreciated.

thank you

3 Replies 3

spremkumar
Level 9
Level 9

hi

is it possible for u to post ur pix config ??

regds

Hi prem,

Kindly provide an e-mail,i'll post the config to you

hi

if possible would suggest to post the config here without any sensitive infos like paswd,public ip coz if i m not in a position to help others who view tht can share some points from their experince.

regds

Review Cisco Networking for a $25 gift card