Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,I have a very high level scenario wherein i got 2 core switches (collapsed core) consisting 4507 with Sup 7E connected to the server farm switches. All the server farm/access switches connects to both the core switches as per the general topology...
I am currently working on a Lab setup which would eventually become a CoE lab after some point of time. I have attached a ppt which shows the current BOM in distribution/service layer. Based on the hardware i have worked out a model in which setup is...
Hi NetprosI am facing a strange problem with one of my FWSM installed in my spare 7609 box.I do have a FWSM installed in the live production network in which the access-list shows supported and i am able to configure them up ,but in the spare box i a...
Hi i am trying something inline with title mentioned but i m getting stuck up in getting my vpnclient establish the connectivity with my IPE box which is 7206.i have tried establishing the dynamic ipsec with my 6513 box configured to accept the same ...
Hi Folkswhen i issue show mpls interfaces hidden on my 7606 boxes m getting the following o/p but donno whts meant by this ,though we havent created any VRFs i m getting the below pasted o/p.i tried cheking out the command lookup tool for the options...
Hi IbrahimThe best thing would be to start with the data sheet or manual of the blade server and find out what it shows if the orange led is blinking.Simultaneously you can also check the port status on the switch and also the logs to check out the p...
HiCan you format the flash and upload the IOS back onto it and try reloading the router? Backup both the configs and the IOS before you start this excercise.regds
HiCan you post the output of current show interface gig x/x output and do a clear counters interface gig 1/1, wait for sometime and capture the show interface gig x/x and post the output as well here?regds
Hi ArunTo some extent it does overlaps and the UDLD functionality can cause a port to move into errdisable mode. Especially if you are working on SFP or GBICs i would suggest to go ahead with UDLD as well.For more info do refer this linkhttp://www.ci...
