pix 515E with 2 internet connection

[Ali mosbah Abdo]

Dear all,

i have pix 515e v 7.0 (2) its configured for internet access , vpn Remote access & L2L, its works fine with one internet connection.

i want to add second internet connection on different interface and i want to use this connection for access internet for specific address with keeping the old connection for vpn & normal internet access.

so i am asking for the best scenario  to do this.

can i use another global & nat commands with and routing command for this specific address??    

[Jennifer Halim]

If you are using the PIX for exactly a known specific address on the second internet connection, then yes, this will be supported.

However, if you are going to use the internet connection for just another default route, then this is not a supported configuration.

For the specific address, here is the command:

route internet-2

nat (inside) 5

global (internet-2) 5 interface

Hope that helps.

[Ali mosbah Abdo]

dear jennifer,

thanks for your reply.

yes i just want to access spicific addresses in the internet.

i will use this commands.

BR