Can I bind my pix 515 to multiple Outside IP's? I want to use port 80 to get to my web server on one external IP and port 80 on a different IP to another internal server. If yes Then how ... (programming humour intended)
> access-list inbound permit tcp any host 22.214.171.124 eq www
> access-list inbound permit tcp any host 126.96.36.199 eq www
> access-group inbound in interface outside
where 188.8.131.52 and 184.108.40.206 are the two external IP addresses, and 10.1.1.1 and 10.1.1.2 are the two internal hosts that they map to. You'll obviously have to get these external addresses assigned to you by your ISP and have them routed to your PIX.