PIX firewall and SSL

[ajarina]

My client wanted to enable SSL in there network. Do i have to reconfigure the firewall (PIX501)? Im not sure if still need to do a fixup command like below:

fixup protocol https 443

or I need to permit it only in the access-list. What do you think? Please help.

[yusuff]

You only need to allow SSL through PIX in your access-list. There is no fixup for HTTPS.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/fixup.htm#xtocid2

HTH

R/Yusuf