PIX IP redirection

[brian.wilson]

Hi,

We have a PIX 515E running 6.2(2).

I'm trying to redirect anything coming inbound on to a certain IP address and port to a different IP address. For example;

traffic coming into the PIX for 13x.11x.21x.3 on port 25 needs to be sent to 13x.11x.21x.5 on port 25. It would be nice if we could do it based on where the traffic comes from.

The catch is our pix is 'backwards' - private addressing on the outside and public addressing on the inside. We do not NAT because we come out with native public addresses.

Help is appreciated, can't seem to grasp this because of the way our network sits.

Thanks to all in advance.

[hemendoz]

Hello Brian,

Sounds like you need Policy NAT on the Pix. Does this link help?

Using NAT and PAT Statements on the Cisco Secure PIX Firewall

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800b6e1a.shtml#usingnat