I have a situaion that we've not encountered before. We have a school that has wireless laptop carts. The kids have figured out they can connect to unsecured networks from homes around the school and get to the Internet bypassing the filter. Any i...
I hope someone can please help here. Have Cisco 3845 connecting remote sites using PPP serial connections, routing IPX and IP. Some far ends are Cabletron SSRs, some Cisco 17xx. IP works great. All IPX servers and routes show on all the devices. ...
Hi, We have a PIX 515E running 6.2(2). I'm trying to redirect anything coming inbound on to a certain IP address and port to a different IP address. For example; traffic coming into the PIX for 13x.11x.21x.3 on port 25 needs to be sent to 13x.11x.21x...
Hi,We have a PIX 515E running 6.2(2).I'm trying to redirect anything coming inbound on to a certain IP address and port to a different IP address. For example;traffic coming into the PIX for 13x.11x.21x.3 on port 25 needs to be sent to 13x.11x.21x.5...
Hi,I'm having the exact same problem. New static NAT will not connect RDP from outside to inside, but I can ping and trace right to the inside device. Running clear xlate doesn't change anything and the static is showing in the xlate table.Further,...
Yeah, I've got the school's IT dept looking into that thinking it may be the only way. We've had schools that have had the neighbors piggybacking them, but never the other way around.
Being a production system, I wouldn't use debug unless it came to that, and then only out-of-hours.You could set buffer logging to warn - logging buffered warningsand then use - sho logg | inc "ip address of bad box"to see entries for your specific b...
What happens when you remove - nat (inside) 30 10.7.4.0 255.255.255.0?There is no matching global statement and the nat 30 line is more specific than the nat 10 line. Doesn't the NAT statement that is more specific apply?What do the logs say when yo...
