10-02-2013 09:27 AM - edited 03-11-2019 07:46 PM
I have a PIX 506e with code version 6.3(5) on it and I am trying to put in a PAT rule so that anything that doesn't have a static NAT configured uses the outside interface's ip address. This is what I have:
nat (inside) 10 10.0.120.128 255.255.255.192 0 0
global (outside) 10 interface
Is this correct? I need all the other static nat's to still be in use. Thanks!
Solved! Go to Solution.
10-02-2013 12:38 PM
If 10.0.120.128/26 is your internal network, then this is correct.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
10-02-2013 12:38 PM
If 10.0.120.128/26 is your internal network, then this is correct.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide