PIX pass-through issue

[andreademarchi]

Hi All,

I have an access-list applied to the interface outside of my PIX 515 firewall, I permit just the tcp port 443.

If I do a portscan I found ports TCP 25, 110 also opened and some UDP ports.

If I do telnet on the tcp ports I can connect even if I have not services behind that ports. How this could happen?

Thanks

[shijasm]

I thing when you have fixup entry for those protocol portscanners shows like open ports, you will not be able to pass through.....

and mintime make sure there is no access-list or conduit mixed.

Thanks & Regards

Shijas