09-26-2005 01:02 PM - edited 02-21-2020 12:25 AM
Hi,
I have a PIX 515 as my default gateway and i need to route some traffic to another router. does the PIX support Static routing yet. Its 6.3.(4)
Thx
09-26-2005 03:56 PM
in short yes, it has supported this for quite some time.
just use the route command
Cheers
09-26-2005 09:03 PM
Hi,
yes it supports but be aware the PIX does not route traffic received on one interface back out the same interface (6.3)
the below link explains static route with the one Cisco PIX and two routers :
09-27-2005 10:08 AM
so basically i have a PIX we will call the ip 10.10.10.1 Which is everyones Default gateway i need traffic thats destined for 10.20.1.0 to go to router 10.10.10.2. so all i need is
route insice 10.20.10.0 255.255.255.0 10.10.10.2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide