Pix Simulator

[edmundkainyah]

Started learning for the pix exams and wondering if there a simulator for pix 6.3 or 7.0 Or i need buy a real device to use for the learning?

[ddarby1]

You should really buy a real device and get hands on.

515 with 3 interfaces is optimum, but a 501 is fine.

I don't know of any simulators personally.

[Patrick Iseli]

Try this one: http://rgxpro.com.ar/simonline/CSPFA.htm

sincerely

Patrick

[edmundkainyah]

Thank you Patrick.iseli. I went to the site and i am just too happy to see something like that. I am going to use that site together with a book i bought just last week(Cisco ASA and PIX firewall by David Hucaby) and then later try and buy one device. Thanks so much.

[Patrick Iseli]

The pleasure is mine, you can also ask your local Cisco Office if they have a LAB. Some sites permits guest and partner access to it for free.

Click on Rate this Post to help identify the most useful NetPro content.

sincerely

Patrick

[edmundkainyah]

Hi Patrick.iseli,

I will check to see if i can also get an online access to a real lab to help me.

Thanks

[pwicks]

I agree that you should buy a small Pix 501 to learn on. If your budget is tight, you can get a 501 on E-Bay for around $200.

As far as simulators go, I only know of one site online: http://www.chinaitlab.com/www/experiment/lab10.asp

It is not running 6.3 or 7, but it is a good training reference for a beginner.

[edmundkainyah]

Thank you Pwicks but it took me to the same site.

Thanks

[pwicks]

Sorry for the late reply. When I send a post, the browser spins for several minutes. There were no post in the thread when I pressed the post button, there were several there after my post finally arrived. No disrespect to you or Patrick intended.

[edmundkainyah]

No worries Pwicks. Thanks