Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I've a question regarding CSS Licensing following an upgrade if anyone can help:I've upgraded a CSS 11050 from 3.10 to 6.10, but the feature set has gone from the Enhanced Feature Set to the Standard One.I followed a Cisco / Upgrade License gu...
Hi folks,I've inherited two CSS's in a one-armed design configuration and am after a bit of help:Currently they perform source NAT, which is not what we want as our Web-Servers need to track/log the Source-Addresses.My question relates to whether thi...
Hi Folks,Can anyone help: I have a CatOS 6509 that I cannot login to.I logged in the other day to try and change the password after the last admin left the company.At first I couldn't change the password because I wasn't using the command correctly (...
Hi,I wonder if anyone can help, has ideas on this:We have a problem with a site-to-site VPN between a Watchguard firewall and an ASA 5510, running 7.0(7).The VPN works fine, but, 'breaks/drops' connections at about 75% of the IKE lifetime, which is p...
Hi,A question to load balancer officionados:We currently have a CSS operating in a 'one-armed design', however this performs Source NAT so that return traffic from web servers goes back through the CSS.The problem is that we have a requirement to lo...
Hi,Thanks for that - I think that you might be right - but I just wanted to be sure. 3.10 is Arrow Point.I wonder if anyone has any thoughts on the blank serial number, hardware module and MAC address reported by the unit. This seems like an error me...
So 'type nci-direct-return' is the culprit and turns on 'NAT Peering'.The documentation I found on this command wasn't the clearest.Now, how to get that license upgraded back to the Enhanced version.....
OK, I can now see why the 'type nci-direct-return' command has disappeared: it requires the enhanced licence - seems like the licence needs to be upgraded as well after upgrading the firmware.I wonder if the source nat behaviour is due to this comman...
Thanks for your reply Chris.I am/was slightly confused as I was under the impression that source nat was the default behaviour of the CSS - I didn't see any commands in the config, which seem to have been entered in order to configure it.However, sin...
An update for anyone interested in this thread or with a similar problem:I first tried manually through snmp, Net-SNMP and various Cisco documents to download the config (and upload a modified config) from the offending Switch with partial success.I ...
