07-02-2001 02:05 PM - edited 02-20-2020 09:48 PM
Does anyone know how to interpret the output of "show conn" command, specifically the "flags"?
Here is an example:
SNIFF# sho conn local 192.168.120.189 net 255.255.255.255
TCP out 192.168.225.30:80 in 192.168.120.189:1510 idle 0:00:02 Bytes 375 flags U
O
TCP out 192.168.225.31:80 in 192.168.120.189:1499 idle 0:00:50 Bytes 1011 flags
UIO
TCP out 192.168.225.30:80 in 192.168.120.189:1515 idle 0:00:01 Bytes 1917 flags
UfFrIO
I'd appreciate any feedback on this.
Thanks.
Mustafa Hussein
Comark, Inc.
07-05-2001 02:58 PM
Heres the breakdown. d=Dump, clean up connection. f=FIN seen in inbound packet. F=FIN seen in outbound packet. H=HTTP get in a UDP connection, H can also mean H.323. I Data in. J=Java applets are not permitted on connection. m=SMTP data. O=Data out. q= SQL*Net data fixup. R=Remote Procedure Call (RPC). r=In use. U=Connection is up. I think some other flags may show up but they are specifically for Cisco engineering if requested during trouble-shooting.
07-06-2001 10:29 AM
Where did you find this stuff? (its great!)
07-24-2001 08:43 AM
Unfortunatelly CCO does not give any information on the flags. You can find some of them only in the documentation of 4.4. It seems they are not important any more.. :)
Once I opened a case for some connections flags, and got almost all of them:
| Flag | Description
| U | up
| f | inside FIN
| F | outside FIN
| r | inside acknowledged FIN
| R | outside acknowledged FIN
| s | awaiting outside SYN
| S | awaiting inside SYN
| M | SMTP data
| H | HTTP get (not used)
| | SIP connection
| | SKINNY (not used)
| I | inbound data
| O | outbound data
| q | SQL*Net data
| n | nailed connection (no supported)
| d | dump
| P | inside back connection
| E | outside back connection
| G | group
| p | replicated (unused)
| a | awaiting outside ACK to SYN
| A | awaiting inside ACK to SYN
| B | initial SYN from outside
| R | RPC
| H | H.323
| | SIP connection
| | SIP media connection
| | SIP trans connection
| D | DNS
Best,
Attila
07-25-2001 02:13 PM
many thanks, this goes in the bag of tricks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide