
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-19-2005 01:24 AM - edited 02-20-2020 11:52 PM
Does anybody know if with Microsoft Internet Authentication Service (IAS - radius service)
it's possible to use download the access-list to the PIX firewall (per-user access-list) and how i can configure the IAS for this feature.
Thanks in advance.
Solved! Go to Solution.
- Labels:
-
Other Network Security Topics
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-19-2005 06:55 AM
Yes, this is possible. Take a look at this link which explains how I was able to get it to work:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/mngacl.htm#33910
I can't remember all the steps I took to get the ISA server to return the CISCO-specific VSA (Attribute 26) string but you should be able to figure it out. I am, by no means, an IAS expert.
Hope this helps.
Scott
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-19-2005 06:55 AM
Yes, this is possible. Take a look at this link which explains how I was able to get it to work:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/mngacl.htm#33910
I can't remember all the steps I took to get the ISA server to return the CISCO-specific VSA (Attribute 26) string but you should be able to figure it out. I am, by no means, an IAS expert.
Hope this helps.
Scott
