please delete 2

[schustbri]

......

[Jan Rolny]

Hi Brian,

PIX525 (8.04)will probably have different command line syntax comparing ASA 5510(8.3). So some configuration will have to be "translated" to new ASA.

Regards,

Jan

[Julio Carvajal]

Hello Brian,

I have to agree with Jan,

The issue might be that you are running a version different than the one on the PIX (and as an example after 8.3 the entire syntax-configuration changed) so you will have a home-work if this is the case,

Here is a link with some really useful information regarding the changes on 8.3

https://supportforums.cisco.com/docs/DOC-12690

Let us know how it goes

Julio