12-14-2020 10:05 AM
Is it possible to config Port based authentication using ISE?
I know it would be possible to use IEEE 802.1x Port-Based Authentication but I need to be through ISE.
Any implemented case?
I have to implement this on IOS & NX-OS appliances
Solved! Go to Solution.
12-14-2020 10:09 AM - edited 12-14-2020 10:11 AM
Hi @Serpent2010
Yes, you can do wired 802.1x authentication using ISE, example here.
You don't generally do 802.1x authentication on NX-OS however, that is a DC hardware. NX-OS is also not on the ISE validated compatible access device list. 802.1x would generally be deployed on the campus access layer switches.
HTH
12-14-2020 10:17 AM
Thank you for the quick reply
12-14-2020 10:09 AM - edited 12-14-2020 10:11 AM
Hi @Serpent2010
Yes, you can do wired 802.1x authentication using ISE, example here.
You don't generally do 802.1x authentication on NX-OS however, that is a DC hardware. NX-OS is also not on the ISE validated compatible access device list. 802.1x would generally be deployed on the campus access layer switches.
HTH
12-14-2020 10:17 AM
Thank you for the quick reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide