Port based authentication using ISE

[Serpent2010]

Is it possible to config Port based authentication using ISE?

I know it would be possible to use IEEE 802.1x Port-Based Authentication but I need to be through ISE.

Any implemented case?

I have to implement this on IOS & NX-OS appliances 

[Rob Ingram · Accepted solution]

Hi @Serpent2010 

Yes, you can do wired 802.1x authentication using ISE, example here.

You don't generally do 802.1x authentication on NX-OS however, that is a DC hardware. NX-OS is also not on the ISE validated compatible access device list. 802.1x would generally be deployed on the campus access layer switches.

HTH

[Serpent2010 · Accepted solution]

Thank you for the quick reply