Possible to Use FTD as DHCP Server with multiple DNS servers

[mumbles202]

I'm in a situation where I need to use the FTD as the dhcp server for both my guest and internal subnet.  At present I have it configured to give out my internal domain and dns servers.  Can I use a FlexConfig configuration to modify the dns settings under the guest dhcp scope?  I'd like to change this:

dhcpd address 172.27.200.100-172.27.200.199 Guest_Access
dhcpd enable Guest_Access

to this

dhcpd address 172.27.200.100-172.27.200.199 Guest_Access
dhcpd dns 4.2.2.2 8.8.8.8 interface Guest_Access
dhcpd enable Guest_Access

This FTD is FMC managed running 7.2.0 code.

[MHM Cisco World]

Solved: Specify DNS servers for DHCP server in FTD - Cisco Community

[mumbles202]

Ok thanks.  Looks like it's not possible; back to drawing board now in terms of a solution for dhcp for that subnet.

[balaji.bandi]

If i were you i will stick some small box run DHCP Server (using Linux in 10 - 20min time)

[balaji.bandi]

Are you looking Guest and Internal have same subnet ?

or you looking 2 DHCP pool for Guest and Internal users ?

[mumbles202]

Guest and internal would need 2 different subnets with 2 different sets of dns servers since guest wouldn't be able to get dns from internal servers.

This is for an internal wireless solution so going to look to move the dhcp to the WLC.