POV with ASA FirePOWER: error loading FirePOWER service image

[luca.lacchini]

Hi,

I'm doing a POV with an ASA5506-k9. I loaded the boot image and did the recover process to load the FirePOWER service. When I try to do the system install of the pkg, I get an error:

"Package extraction failed. This problem usually indicates that a package is corrupted or that it is incompatible with this system. Please verify that the package is a valid upgrade for the software version running on this system.
Upgrade aborted."

I'm using an image get from Cisco suppport "asasfr-sys-5.4.1-211.pkg" and the boot is "asasfr-5500x-boot-5.4.1-211.img".

Anyone had this problem or can help me?

Thank you.

[Marvin Rhoads · Accepted solution]

Those are the correct images.

Have you checked the MD5 checksum of your download? For the pkg file, it should be "161bf0c6b5339a7b79c0163d5a73c77c" as noted on the download page.

[luca.lacchini]

I asked again to support to have another image and it works.

[Oliver Kaiser]

Make sure that your ASA version is compatibel with SFR 5.4.1

The following ASA versions are compatible with your SFR version:

9.3(2) and later (ASA5506-X only)

9.4(1) and later

9.5(1.5) and later

9.6(1) and later

For more information check the Compatibility Guide