11-19-2015 06:32 AM
Hello,
We just bought a Cisco 5506-x Firewall to use on our small office.
We have a Fiber 100/100mb internetconnection and our ISP useses PPPoE to make a connection.
My problem is that the ISP makes use of PPPoE with a vlan 6 ( 802.1Q ).
I cann't find a way to configure the vlan with in the PPPoE connection.
Is there a way to make this work?
Thanks in advance.
Richard
Dutchcloud
The netherlands
11-19-2015 11:59 AM
Hi Richard
If you just want to make sure that you have vlan 6 on the outside interface (the one that will be doing PPPoe) just follow the guide below
http://www.petenetlive.com/KB/Article/0000831.htm
Thanks
11-23-2015 01:16 AM
Hi pantelis,
Thanks for the information.
But I found out that the Cisco ASA 5506-X does not support layer 2 on the gig ports.
So Vlan 6 will probably not work on the PPPoE port I configured.
So any other suggestions are welcome
Richard
11-27-2015 02:29 PM
Hi,
Cisco ASA 5506-X supports 5 VLans and 30 with Security Plus. You can define sub interface with Vlan 6 and select it for PPPoE interface. You can find the guide below.
http://www.petenetlive.com/KB/Article/0001085.htm
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide