Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Yes, it will do.First of all, it is important which channels your clients support in your network. Many older clients may not support UNII-2 and UNII-2 Extended channels.If the clients do not support a channel it should not connect to your APs.If you...
You should better disable the band 3 for indoor usage and use the frequencies that do not need DFS.If your AP operates at these channels, I hope you dont have any problem with any device.Frequencies and channels at 20Mhz that do not require DFS.Chann...
Which model are you using?In US The UNII-1 band is designated for indoor operations (5.15-5.25-GHz), The UNII-2 and UNII-2 (5.25-5.35 GHz and 5.47-5.725 GHz) extended bands are for indoor and outdoor operations, and the UNII-3/ISM (5.725 to 5.825 GHz...
If you set "world-mode dot11d country-code US indoor" the DFS band 3 is blocked by default. You can use the command "no dfs band block" to unblock all frequencies for DFS.