I have a FPM 1010 in fdm mode.
I have a couple of routed networks that do not talk to each other.
I have PPTP inbound setup on each of the Router connections to RRAS servers on that network. Including the network I am on.
My issue is I am trying to setup outbound PPTP to our customers location from individual machines located on my internal routed network. My connections on my computer to my customers has been setup for a long time and working without issue. But it was working while using an ASA 5506. Now that I have the 1010, I cannot get the connection to work. I have email servers and www servers and yada-yada-yada servers natted in each network and all is good.
But I cannot get my own machine to make the PPTP connection to a customer that I know is setup and working correctly. I can see users connecting to the RRAS servers at the customers local from other locations.
I know its an issue in "Policies" but I cannot make it work. And the Monitoring portion of the FPM 101 leaves a lot to the desired. I like the old ASA interface for monitoring. Any help would be appreciated.
Signed
Frustrated.
